HeartWood Labs, a part of Arrowmaker Group Inc., is a drone service provider offering multispectral imaging for agriculture. Earlier this season, one of their customers, a soybean farm in Northwest Iowa, hired them to identify where existing drainage tiles were located in some of their fields.
Drainage tiles are extremely important because they help control moisture levels in soil, and are also a significant investment for farmers. Knowing where existing pipes are can save growers lots of time and money while ensuring optimal crop growth.
Flying with RedEdge
For this particular job, HeartWood Labs flew a DJI Matrice 100 equipped with the MicaSense RedEdge and analyzed the results in Pix4Dfields. “We prefer flying the RedEdge over other multispectral sensors that we own because we feel the quality of the reflectance maps it produces is superior, and the five available bands are better suited to identifying the features we are looking for, in this case, drainage tile,” said Adam Batschelet, Business Manager of Ag Technology, at Heartwood Labs.
RedEdge is a professional multispectral sensor for agriculture that captures five spectral bands (red, green, blue, near-infrared, and red edge) to enable more detailed analytics. Its ease of integration with a wide variety of drones, allows growers to optimize management practices, streamline operations, detect stress and disease early, and capture accurate data for scientific analysis.
Processing with Pix4Dfields
Using Pix4Dfields the HeartWood Labs team was able to process the RedEdge data right after the flight on a laptop computer, enabling them to present the results to their client and take action without leaving the field.
“Pix4Dfields cuts down on our processing time by a very large margin. Processing for us is typically the most time intensive and costliest part of the services we provide. By using Pix4Dfields, we are able to spend much more time out in the field collecting data, instead of sitting in the office processing.”
Including preflight checks, flying and processing, the total time from start to finish was approximately 1 hour for a 160 acre field.
After processing the imagery in Pix4Dfields, the team was able to analyze the resulting data in the same platform and while still on the field.
Pix4Dfields provides powerful agricultural tools like vegetation indices (including NDVI and NDRE), annotations to facilitate scouting, zone and prescription maps to prescribe and monitor applications, and split-screen and double-screen features to compare different layers and provide context.
The team was able to identify the drainage tiles using the NDRE index, an index that can only be calculated if the red edge band is available. Since the RedEdge sensor captures the red edge band, the team was able to spot the differences in the vegetation growing along the field. The plants over the tile lines were healthier than the plants not directly over the lines.
With the tiles identified, the team presented the results to the customer using the split-screen tool in Pix4Dfields to highlight the differences between layers. “The comparison tool is fantastic as it allows us to sit down with the grower and demonstrate how important multispectral imagery really is. Comparing the RGB ortho in real time against the NDRE index really helps us to sell the benefits of the multispectral data. The RGB ortho was unable to show the tile lines, while the calibrated multispectral NDRE results showed them perfectly.”
Then they used the zonation tool to delineate areas of the field that were experiencing more stress, and ground-truthed those areas to determine where new tile should be installed. Most of the stress was occurring where water drainage was not being handled sufficiently. Using the annotation tool, they marked the spots where the tile lines were throughout the field for future references.
The DSM generator came in handy to show the grower a 3D model of exactly how water behaves on his field due to the low slopes and small hills that aren’t always obvious.
“Previously we have used Pix4Dmapper and achieved great results, however the decision to use Pix4Dfields was a no brainer once it became available. The ability to process RedEdge data very quickly (under 8 minutes) and at the fields edge is a tremendous asset to us.”
A special thank to Adam Batschelet, Business Manager of Ag Technology, at Heartwood Labs for his collaboration with this case study.
If you have a case study that you would like to showcase, please let us know.